Roofing Nails – All you need to know

Roofing nails are used in fasten shingles during roof installation, to to attach roof tiles, sheet metal and also install roofing felt for waterproofing. They have a broad nail head to keep sheathing, house wrap, and roofing felt in place. More commonly found as ring shank nails, they sometimes will have twisted shafts for holding power. There are several kinds of roofing nails, made of different materials and in various sizes. The tips of the nails are sharp and pointed for easy insertion, so you don’t break the shingles or damage the wood when driving the nails through. Short and stocky roofing nails are galvanized to resist corrosion while keeping shingles in place. Copper nails are sometimes used for roofing.

Features

  • It fits various environments.
  • It can be utilized with different roof materials.
  • It is commonly used.
  • They also satisfy different budget requirements.

Application

Roofing nails have different materials, so they have been proven to be perfect for several environments, especially austere environments as well as tropical areas. They are commonly used in the different roof constructions, such as the wood, metal roof, other shingles, flashings, and so on.

Plastic cap Roofing nails

Plastic cap roofing nails are referred to as galvanized nails with plastic caps. These categories of nails are inserted through a plastic disk to intensify holding power. They also have the ring shank and are often made of high carbon steel. The color is various.

Furthermore, plastic cap roofing nails are ideal for fastening roofing felt, house wrap, sheathing, underlayment, and more. The ringed shank and broad round head on this nail ensure superior holding power for reliable installation. Likewise, its capped-head helps seal out moisture that can infiltrate sidewall, thereby decreasing blow-offs and lateral slippage. The electro-galvanized finish on this nail offers more exceptional rust and corrosion protection.

These sets of nails can be installed with full assurance. This is because its sharp point easily pierces felt without ripping, and its adaptable plastic head quickly conforms to different surfaces. As a result of the broadhead and tight hold, you only need fewer nails to get the job done. Use this fastener with a plastic cap roofing nailer.

5/8 Roofing Nails

For the most wide-ranging selection of nails and screws, look for 5/8 roofing nails. No matter the size of the job or the project you are involved, this set of nails has the optimal fastening solution.

As construction materials and techniques evolve, the 5/8 roofing nails keeps pace with the changing technology. They have been devised to meet the unique needs of projects such as roofing or drywall. Often time, they are known by the application for which they are intended. They are suitable for applying roofing asphalt shingles, insulation board, and felt to wood substrates. The large head and heavier shank gauge also provide greater holding power. The 5/8 roofing nail also appropriate for use with vinyl siding.

7/8 coil Roofing Nails

The 7/8 coil roofing nail is the combination of several roofing nails. They are often the best choice for roofing construction work because they are easy to use and as well durable.They areappropriate for composition roofing and other roofing applications, except in very high humidity, salt spray, or hurricane environments were a hot dipped or stainless ring-shank can be used. It fits all standard 15 degree collated coil roofing nailers. Also, it’s ideal for asphalt roofing, insulation board, industrial construction, foundry, general framing and so on.

Feature

  • These coil nails can resist rust and watering.
  • Feature a double cooper wire collation.
  • Very convenience and quick.
  • Smooth shank for rapid installation.
  • Ring shank can supply superior holding power.

Aluminum Roofing nail

Aluminum nails are relatively common, and they are best used in conjunction with asphalt shingles and metal. These nails often tend to get a bad rap for being made out of aluminum. But in reality, they are durable and are toughened to better mimic steel. When it comes to budget-friendly nails, Aluminum nails are often better when compared with others. They are a reliable choice for keeping your roof secure and avoiding the long-term risk of rotting or loosening.

Furthermore, aluminum roofing nails have a bend resistance because they are made from high-tensile aluminum alloy. They are most usually used for metal locking, so it also called metal roof nails because they have superior anti-corrosion. Because of their flathead and bright color, they can be easily used for decoration. On the other hand, aluminum roofing nails are not recommended for harsh environments where they are exposed to chemicals and salt.

Feature

  • Ability to resist-corrosion.
  • Bend resistance capability.
  • Ideal for appropriate hanging and spreading stress.

2 1/2 Roofing nails

2 1/2 roofing nails are used to attach asphalt shingles, insulation board, roof shingles, substrates felt to wood framing. It also can be used for vinyl siding. They are manufactured for quick and easy installation. The large, flat head provides a large bearing surface and reliable holding power for a secure finish. These nails have been electro-galvanized for corrosion resistance with a smooth, more aesthetically pleasing finish. However, avoid using this nail in treated lumber or where corrosion is a concern.

Leave a Reply